Your Kia Niro is an all-electric car, so you never have to worry about filling up at the pump again. But that also means you must be conscious of when to plug in and charge your battery. While it may seem like a simple task, there are a few things you’ll want to keep in mind to ensure a safe and successful process. This blog post will show you how to unplug your Kia Niro charger in just a few easy steps.
Steps to Unplug Your Kia Niro Charger
1. Check if It’s Fully Charged
Before unplugging the charger from your car, you should check if your car is fully charged. When devices are left plugged in when fully charged, it can shorten their lifespan and decrease their battery capacity over time. So, if you want to keep your devices running at peak performance, it’s important to unplug them once fully charged.
Here Are a Few Tips:
-Check the indicator light: Three charging status indicators are available in the dash of Kia Niro. The charging status can be checked by viewing these indicators.
If all three lights are illuminated, your car is fully charged. But if you see those three lights blinking, check your charging connection properly.
Three static lights on means you are ready to go.
-Use a third-party app: Several apps can tell you how charged your car is. First, you need to set up your vehicle with those apps manually. Then, you are ready to keep receiving your car charging status on your private little screen.
2. Make Sure the Car Door Is Unlocked
Once your car is full, you can proceed to the next step. Before you touch the car charger, you should first unlock your car’s door. Once your car door is unlocked, your car system automatically triggers its system, so the charger is ready to unplug. Otherwise, you will be unable to open the charger cord from the charging outlet.
3. Now Unplug the Charger
After you unlock your car’s door, you must come to the charging port. Then hold the charging connector handle and keep one finger on the pressing button. Now pull the charger out and keep pressing the charger pressing button at the same time. And keep the charging cord in its place.
While pulling the charger out, remember to press the charger release button simultaneously; otherwise, you could damage your charger port.
4. Cover the Charging Port
After putting in the charger and its cord, don’t forget about the charging port. You need to replace the charging inlet cover as it was before the charging. Just slide up the covers, and once you hear the click, you will know that the inlet port is adequately covered.
After the inlet cover, close the main charging door. That’s it! You have completed the whole process.
5. Remember You Have an Auto-Lock Option for the Charger
The Kira Niro EV also has an auto-lock mode to help prevent others from removing your charging connector before charging is done.
You must press the instrument panel’s auto button to activate this auto mode with the charger icon. After starting the mode, the button should be illuminated. Auto mode will lock the charger in its place while it is charging. Therefore, no one will be able to unplug the charger except you. This is handy at public charging facilities as it allows others to use the charger after your car is fully charged.
It can be unlocked when the car battery is fully charged. When your auto button is not pressed, the led will not be illuminated. Instead, the charger will be locked until you unlock the doors. After 15 seconds of opening the doors with no action, the charger will be closed again. So if you want to unplug the charger in auto mode, you should remove the plug within 15 seconds of unlocking the door.
Cautions to Follow Before Unplugging the Car Charger
Most of us have probably had the experience of unplugging a car charger without first checking to see if the device is fully charged. Unfortunately, this can lead to many problems, from a dead battery to a damaged charger. To avoid these issues, you should take a few cautions before unplugging your car charger.
First, make sure that the device is fully charged. If it’s not, there’s a good chance that unplugging the charger will cause the battery to die.
Second, unplug the charger slowly. If you yank it out, you could damage your car’s charger or port.
Finally, be sure to check the light on the charger to make sure it’s green. If not, the charger isn’t working correctly, and you could damage your car’s battery.
By following these simple tips, you can avoid any potential problems that could occur by unplugging your car charger. So be sure to keep them in mind the next time you need to charge your device!
FAQ
1. How Do I Know if My Car Charger Is Working?
There are a few ways to tell if your car charger is working. The first is to look at the light on the charger. If it is lit up, then the charger is working. The second way is to plug the charger into your car and see if the car’s battery starts to charge. If it does, then the charger is working.
2. How Do I Troubleshoot My Car Charger?
If your car charger is not working correctly, there are a few things you can do to troubleshoot the issue. First, check to ensure the charger is correctly plugged into the cigarette lighter socket. Next, check the fuse to see if it has blown. If neither fixes the problem, you may need to replace the charger.
3. How Do I Store My Car Charger?
The best way to store your car charger is in a cool, dry place. This will help prolong the charger’s life and keep it working correctly. You should also avoid storing it where it could become damaged, such as in a car trunk.
You might also read: How To Remove Car Mats Easily and Quickly!
Concluding Remarks
In conclusion, unplugging your Kia Niro charger is easy to complete in just a few steps. With the proper knowledge, you can quickly and safely unplug your charger without any issues. With these steps mentioned above in this blog, you won’t have to worry about a second thing for removing your car charger.